Q-tech QT3C Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Příslušenství pro elektriku Q-tech QT3C. Q-Tech QT3C User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 4
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
AMSC N/A FSC 5955
INCH-POUND
MIL-PRF-55310/13J
9 August 2010
SUPERSEDING
MIL-PRF-55310/13H
11 June 2009
PERFORMANCE SPECIFICATION SHEET
OSCILLATOR, CRYSTAL CONTROLLED, TYPE 1 (CRYSTAL OSCILLATOR (XO)),
300 Hz THROUGH 10 MHz, HERMETIC SEAL, SQUARE WAVE, CMOS
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and MIL-PRF-55310.
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3 Standard marking, except omit Part or Identifying Number (PIN) this location.
4. Unless otherwise specified, tolerances are ±.005 (0.13 mm) for three place decimals and ±.02 (0.5 mm) for two
place decimals.
5. Case to be connected to base pin 4 to permit shielding of the oscillator.
6. All pins with NC function may be connected internally and are not to be used as external tie points or
connections.
7. Pin numbers shown on package are for reference only and need not appear on part.
FIGURE 1. Dimensions and configuration
.
Ltr Inches mm
Min Max Min Max
A --- .350 --- 8.89
B .480 --- 12.19 ---
C .016 .020 0.41 0.51
D --- .040 --- 1.02
E --- .610 --- 15.49
F --- .502 --- 12.75
G .277 .287 7.04 7.29
Pin number Function
1 NC
2 NC
3 NC
4 B - (GND)
5 OUTPUT
6 NC
7 NC
8 B+
Zobrazit stránku 0
1 2 3 4

Shrnutí obsahu

Strany 1

AMSC N/A FSC 5955 INCH-POUND MIL-PRF-55310/13J 9 August 2010 SUPERSEDING MIL-PRF-55310/13H 11 June 2009 PERFORMANCE SPECIFICATION SHEET OSCILLATOR

Strany 2

MIL-PRF-55310/13J 2 REQUIREMENTS: Interface and physical dimensions: See figure 1. Mounting: See figure 1. Terminals: See figure 1. S

Strany 3

MIL-PRF-55310/13J 3 TABLE I. Dash numbers and operating characteristics. Frequency-temperature tolerance (one-half temperature cycle, referenced

Strany 4

MIL-PRF-55310/13J 4 Ambient pressure: Nonoperating: In accordance with MIL-PRF-55310. Operating: Method 105 of MIL-STD-202, test condi

Komentáře k této Příručce

Žádné komentáře